设为主页  加入收藏
 
·I2S数字功放IC/内置DSP音频算法功放芯片  ·马达驱动IC  ·2.1声道单芯片D类功放IC  ·内置DC/DC升压模块的D类功放IC  ·锂电充电管理IC/快充IC  ·无线遥控方案  ·直流无刷电机驱动芯片
当前位置:首页->技术分享
SSL2103 12W调光E27装饰灯LED照明解决方案
文章来源: 更新时间:2011/8/2 13:36:00
在线咨询:
给我发消息
李湘宁 2850985550
给我发消息
张代明 3003290139
给我发消息
鄢先辉 2850985542
13713728695
 

NXP公司的SSL2103是用于调光LED照明的开关电源(SMPS)控制器.作为一款多用途AC/DC LED照明控制器,SSL2103具有更宽的功率适用范围和更好的调光兼容性,令其适用于可调及不可调LED照明灯。SSL2103除具有SSL2101和SSL2102的功能和性能外,还可以满足更高功率的应用,在正常工作温度下的寿命可以超过75000小时。演示板外形尺寸可以应用于E27、GU10或者PARx 灯。本文介绍了SSL2103主要特性和优势, 方框图, 亮度控制框图, 降压和反激配置框图以及230 V 12 W E27装饰灯LED驱动器演示板主要特性,电路图和材料清单.

SSL2103: SMPS controller IC for dimmable LED lighting
SSL2103 is a Switched Mode Power Supply (SMPS) controller IC designed for LED lighting applications. It is an extension of the NXP SSL2101/SSL2102 product platform, allowing easy design of derivative applications.
When used in combination with a phase cut dimmer connected directly to a rectified mains, it provides dimmability to the application.
In dimmer applications, integrated dedicated circuitry optimizes the dimming curve.
• SSL2101: fully integrated LED driver for lamps up to 10 W
• SSL2102: fully integrated LED driver for lamps up to 25 W
• SSL2103: gives the application designer flexibility permitting the:
control of an external power switch to allow the IC to provide any power
control of external bleeder transistors to provide extended dimmer interoperability
The device includes a circuit that allows start-up directly from the rectified mains voltage.

SSL2103主要特性和优势:
Easy migration to existing lighting control infrastructures, TRIAC and transistor Dimmers
Compatible with most dimming solutions
Optimized efficiency with valley switching managed by built-in circuitry
Built-in demagnetization detection
Built-in OverTemperature Protection (OTP)
Short-Winding Protection (SWP) and OverCurrent Protection (OCP)
Internal VCC generation allowing start-up from rectified mains voltage
Natural dimming curve by logarithmic correction, optimized for human eye response,down to 1 %

SSL2103应用:
The SSL2103 is suitable for various power requirements including:
Retro-fit lamps
LED modules such as LED spots and down-lights
LED strings suitable for retail displays etc.

图1.SSL2103方框图

图2.SSL2103亮度控制框图

图3.SSL2103降压配置框图

图4.SSL2103反激配置框图

SSL2103 230 V 12 W E27装饰灯LED驱动器演示板

SSL2103 230 V 12 W E27 retrofit LED driver demo board
This SSL2103 user manual is intended for 230 V applications of 12 W demo boards of E27-type (and similar type) retrofit light sources.
The circuit implements a Boundary Conduction Mode (BCM) buck converter. It is mains dimmable for both forward phase (triac) dimmers, and reverse phase (transistor) dimmers. It is designed for demonstrating high performance and high efficiency. It produces a 400 mA regulated output current to drive 10 LEDs at a 230 V (AC) input. With the help of an external MOSFET, an efficiency of up to 85 % can be achieved.
This demo board is connected to a high AC voltage (up to 265 V). Avoid touching the demo board during operation. An isolated housing is obligatory when used in uncontrolled, non-laboratory environments. Galvanic isolation of the mains phase using a fixed or variable transformer (Variac) is always recommended.

LED驱动器演示板主要特性:
Key reference board features include:
• Buck converter operating in Boundary Conduction Mode (BCM)
• Designed to operate with an input voltage of 230 V at 50 Hz, 10 %
• Optimized for an output power of 12 W (10 LEDs) at 400 mA output current
• Active damper and inrush current limiter
• Main dimmable with leading and trailing dimmers
• Intrinsically protected against short circuit

图5.LED驱动器演示板外形图

图6.LED驱动器演示板电路图
LED驱动器演示板材料清单:

 
 
 
    相关产品  
 
 
·蓝牙音箱的音频功放/升压/充电管
·单节锂电内置升压音频功放IC选型
·HT7179 12V升24V内置
·5V USB输入、三节锂电升压型
·网络主播声卡专用耳机放大IC-H
 
M12269 HT366 ACM8629 HT338 

业务洽谈:手机:13713728695(微信同号)   QQ:3003207580  EMAIL:panbo@szczkjgs.com   联系人:潘波

地址:深圳市宝安西乡航城大道航城创新创业园A5栋307/309

版权所有:深圳市永阜康科技有限公司  备案号:粤ICP备17113496号