设为主页  加入收藏
 
·I2S数字功放IC/内置DSP音频算法功放芯片  ·马达驱动IC  ·2.1声道单芯片D类功放IC  ·内置DC/DC升压模块的D类功放IC  ·锂电充电管理IC/快充IC  ·无线遥控方案  ·直流无刷电机驱动芯片
当前位置:首页->技术分享
BQ24040 1A单芯锂离子电池充电参考设计方案
文章来源: 更新时间:2013/8/21 13:06:00
在线咨询:
给我发消息
李湘宁 2850985550
给我发消息
张代明 3003290139
给我发消息
鄢先辉 2850985542
13713728695
 

TI公司的BQ24040是一款应用于面积受限的便携式锂离子和锂聚合物电池线性充电芯片,该芯片的供电部分可以来自于USB供电或AC电源适配器供电,可以使用廉价的未经校准的电源适配器进行供电,因具有高的输入电压供电范围及输入过压保护。电池充电分为三个阶段,条件充电阶段、恒流充电阶段、恒压充电阶段。在所有充电阶段,内部有监测控制回路,当芯片内部温度超过阀值时,通过减少充电电流实现对整体电路的保护。本文首先介绍芯片的简介、特性、内部框图及应用方向,并给出相应设计方案的设计原理图、元器件列表及PCB元件布局图。
The BQ24040 series of devices are highly integrated Li-Ion and Li-Pol linear chargers devices targeted at spacelimited portable applications. The devices operate from either a USB port or AC adapter. The high input voltage range with input overvoltage protection supports low-cost unregulated adapters.
The BQ24040 has a single power output that charges the battery. A system load can be placed in parallel with the battery as long as the average system load does not keep the battery from charging fully during the 10 hour safety timer.
The battery is charged in three phases: conditioning, constant current and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if an internal temperature threshold is exceeded.

BQ24040主要特性:
• CHARGING
– 1% Charge Voltage Accuracy
– 10% Charge Current Accuracy
– Pin Selectable USB 100mA and 500mA Maximum Input Current Limit
– Programmable Termination and Precharge Threshold, bq24040 and bq24045
– High voltage (4.35V) Chemistry Support with bq24045
• PROTECTION
– 30V Input Rating; with 6.6V or 7.1V Input Overvoltage Protection
– Input Voltage Dynamic Power Management
– 125°C Thermal Regulation; 150°C Thermal Shutdown Protection
– OUT Short-Circuit Protection and ISET short detection
– Operation over JEITA Range via Battery NTC – 1/2 Fast-Charge-Current at Cold, 4.06V at Hot, bq24040 and bq24045
– Fixed 10 Hour Safety Timer, bq24040 and bq24045
• SYSTEM
– Automatic Termination and Timer Disable Mode (TTDM) for Absent Battery Pack With Thermistor, bq24040 and bq24045
– Status Indication – Charging/Done
– Available in Small 2×2mm2 DFN-10 Package
– Integrated Auto Start Function for Production Line Testing, bq24041

BQ24040应用方向:
• Smart Phones
• PDAs
• MP3 Players
• Low-Power Handheld Devices

图1. BQ24040内部方框图

BQ24040方案介绍:
The bq2404x series of devices are highly integrated Li-ion linear charger devices targeted at space-limited portable applications. The devices operate from either a USB port or AC adapter.
The bq2404x has a single power output that charges the battery. A system load can be placed in parallel with the battery as long as the average system load does not keep the battery from charging fully during the 10 hour safety timer.
The battery is charged in three phases: conditioning, constant current, and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if an internal temperature threshold is exceeded.
The charger power stage and charge current sense functions are fully integrated. The charger function has high-accuracy current and voltage regulation loops, charge status display, and charge termination. The pre-charge current and termination current threshold are programmed via an external resistor on the bq24040 and bq24045. The fast charge current value is also programmable via an external resistor.

BQ24040方案原理图:

图2. BQ24040方案原理图

BQ24040方案材料清单:


PCB元件布局图:


 
 
 
    相关产品  
 
 
·蓝牙音箱的音频功放/升压/充电管
·单节锂电内置升压音频功放IC选型
·HT7179 12V升24V内置
·5V USB输入、三节锂电升压型
·网络主播声卡专用耳机放大IC-H
 
M12269 HT366 ACM8629 HT338 

业务洽谈:手机:13713728695(微信同号)   QQ:3003207580  EMAIL:panbo@szczkjgs.com   联系人:潘波

地址:深圳市宝安西乡航城大道航城创新创业园A5栋307/309

版权所有:深圳市永阜康科技有限公司  备案号:粤ICP备17113496号