| 当前位置：首页->方案设计 |
|
| LTC2983精密数字温度测量系统方案 |
|
|
| 文章来源： 更新时间：2014/11/18 9:25:00 |
在线咨询： |
| |
Linear公司的LTC2983是多个传感器高精度数字温度测量系统,测量精度℃或°F,精度0.1℃ ,分辨率0.001℃,单电源2.85V-5.25V工作,主要用于温度直接测量,RTD直接测量, 电热调节器直接测量和定制传感器应用.本文介绍了LTC2983主要特性,功能框图,应用电路以及演示板DC2296A主要特性,电路图和材料清单.
Multi-Sensor High Accuracy Digital Temperature Measurement System
The LTC2983 measures a wide variety of temperature sensors and digitally outputs the result, in ℃ or °F, with 0.1℃ accuracy and 0.001℃ resolution. The LTC2983 can measure the temperature of virtually all standard (type B,E, J, K, N, S, R, T) or custom thermocouples, automatically compensate for cold junction temperatures and linearize the results. The device can also measure temperature with standard 2-, 3-, or 4-wire RTDs, thermistors, and diodes.
It has 20 reconfigurable analog inputs enabling many sensor connections and configuration options. The LTC2983 includes excitation current sources and fault detection circuitry appropriate for each type of temperature sensor.
The LTC2983 allows direct interfacing to ground referenced sensors without the need for level shifters, negative supply voltages, or external amplifiers. All signals are buffered and simultaneously digitized with three high accuracy, 24-bit ΔΣ ADC’s, driven by an internal 10ppm/℃ (maximum) reference.
LTC2983主要特性:
Directly Digitize RTDs, Thermocouples, Thermistors, and Diodes
Single 2.85V to 5.25V Supply
Results Reported in ℃ or °F
20 Flexible Inputs Allow Interchanging Sensors
Automatic Thermocouple Cold Junction Compensation
Built-In Standard and User-Programmable Coefficients for Thermocouples, RTDs and Thermistors
Configurable 2-, 3-, or 4-Wire RTD Configurations
Measures Negative Thermocouple Voltages
Automatic Burn Out, Short-Circuit and Fault Detection
Buffered Inputs Allow External Protection
Simultaneous 50Hz/60Hz Rejection
Includes 10ppm/℃ (max) Reference (I-Grade)
LTC2983应用:
Direct Thermocouple Measurements
Direct RTD Measurements
Direct Thermistor Measurements
Custom Sensor Applications
图1. LTC2983框图
图2. LTC2983带冷端自动补偿的热电耦测量电路图
图3. LTC2983典型热电耦应用框图
图4. LTC2983典型RTD/电热调节器应用框图
LTC2983演示板DC2296A(LTC2983主板(DC2209)+20输入分接板(DC2210)
The DC2296 is the starter kit for demonstrating the performance and ease of use of the LTC®2983, which is a complete temperature measurement system on a chip.
This kit includes the DC2209 (main demo circuit containing the LTC2983) and the DC2210 (a simple experiment circuit allowing bread boarding). In addition to the starter demonstration kit, sensor specific demonstration boards highlighting the performance of RTDs, thermistors, or thermocouples are also available.
• Universal Temperature Measurement Board – DC2211
• Thermocouple Board – DC2212
• Dedicated RTD Board – DC2213
• Dedicated Thermistor Board – DC2214 L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and QuikEval and Linduino are trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners.
The DC2209 is a member of the QuikEval™ family of demonstration boards. It is designed to allow easy evaluation of the LTC2983 and may be connected to any one of the sensor daughter boards.
These daughter boards allow evaluation of the various LTC2983 sensor types.
The DC2296 is the starter kit for demonstrating the performance and ease of use of the LTC®2983, which is a complete temperature measurement system on a chip. This kit includes the DC2209 (main demo circuit containing the LTC2983) and the DC2210 (a simple experiment circuit allowing bread boarding). In addition to the starter emonstration kit, sensor specific demonstration boards highlighting the performance of RTDs, thermistors, or thermocouples are also available.
图5.DC2209温度测量演示板连接图
图6.DC2209温度测量演示板系列产品
图7.LTC2983精密数字温度测量系统电路图
数字温度测量系统材料清单:
|
| |
|
|
|
|
|
| |
|
| |
|
|
