| 当前位置：首页->方案设计 |
|
| BD57020MWV Qi无线充电参考设计 |
|
|
| 文章来源： 更新时间：2015/12/9 10:03:00 |
在线咨询： |
| |
Rohm公司的BD57020MW是无线电源发送器,包括了用于线圈驱动的逆变器,Qi兼容的通信控制器和解调电路,GPIO,TCXO缓冲器和I2C接口,支持Rohm BD57020MWV Qi无线充电(低功率和中功率),主要用于WPC兼容设备,PC和充电支架底座.本文介绍了BD57020MWV主要特性和指标,框图,典型应用电路图及材料清单与WPC Qi中功率充电参考设计电路图.
BD57020MWV is an integrated IC for the wireless powertransmitter. This device is composed of inverters for thecoil drive, controller for the communication of the Qicompliant and demodulating circuit, GPIO, TCXO buffer,and I2C interface.
BD57020MWV works as a controller in the wirelesspower transmitter based on the Qi compliant by using itwith a general-purpose microcomputer.
BD57020MWV is applied to Qi ver.1.2 (Low Power andMedium Power).
BD57020MWV主要特性:
WPC / Qi ver.1.2 (Low Power and Medium Power)support.
Half Bridge / Full Bridge inverter
Foreign object detection
GPIO 4CH
I2C bus interface
5.0mm x 5.0mm UQFN package 40 pin
BD57020MWV主要指标：
Input Power Supply Voltage Range: 4.2 V to 5.3 V
Input Adapter Voltage Range: 4.6 V to 20 V
Drive Frequency Range: 110kHz to 205kHz
Operating Temperature Range: -20℃ to +85℃
BD57020MWV应用:
WPC compliant devices
PC
Cradle for charge stand
图1.BD57020MWV框图
图2.BD57020MWV典型应用电路框图
图3.BD57020MWV典型应用电路图
BD57020MWV典型应用电路中材料清单(BOM):
BD57020MWV参考设计
A sample circuit design that has been tested and can be used by customers as a reference in their own designs.
图4.BD57020MWV参考设计外形图
图5.BD57020MWV WPC Qi中功率参考设计电路图 |
| |
|
|
|
|
|
| |
|
| |
|
|
