设为主页  加入收藏
 
·I2S数字功放IC/内置DSP音频算法功放芯片  ·马达驱动IC  ·2.1声道单芯片D类功放IC  ·内置DC/DC升压模块的D类功放IC  ·锂电充电管理IC/快充IC  ·无线遥控方案
当前位置:首页->方案设计
MAX13335E-6E汽车高保真立体声音频输入方案
文章来源:永阜康科技 更新时间:2017/12/6 13:58:00
在线咨询:
给我发消息
小鄢 2850985542
给我发消息
姚红霞 3003214837
给我发消息
张顺平 3003262363
13713728695
 

Maxim公司的MAX13335E/MAX13336E是用于汽车的高保真立体声音频输入放大器,具有双路低噪音可编增益放大器,采用全差分(7VRMS)和准差分(3.5VRMS)输入信号以及通过I2C接口控制的诊断功能,工作电压3.3V或5V,28V到-16V容差输入,共模输入-5V到+11.5V,主要用在汽车无线电前置单元,RSA/RSE,连接模块和汽车远程信息处理.本文介绍了MAX13335E/MAX13336E主要优势和特性,框图和应用电路,以及评估板MAX13335E EVK主要特性,电路图,材料清单和PCB设计图.

The MAX13335E/MAX13336E are high-fidelity stereo audio input amp
lifiers designed for automotive applica­tions requiring audio-level detection and/or jack sensing capability. The devices feature a dual-channel, low-noise, program­mable gain amplifier that accepts fully differential and quasi-differential input signals with diagnostics capability controlled through an I2C interface. The devices’audio receiver can also pair with the MAX13325/MAX13326 audio transmitter to form a complete differential audio link in automotive systems.

Each channel of the device features high common-mode rejection ratio (CMRR) (80dB), enabling the recovery of audio signals in the presence of large common-mode noise in automotive environments. An integrated pro­grammable gain amplifier is adjustable from -14dB to +16dB (MAX13335E) and -22dB to +8dB (MAX13336E) with zero-crossing detection to provide an optimum out­put-signal level and limit zip noise. The external flexible diagnostic inputs can be configured to perform jack sense functions or to detect short-to-battery, short-to-ground, open load, and shorts between channels.

The audio inputs are protected against ISO 10605 ±15kV Air Gap and ±8kV Contact Discharge ESD pulses. Both devices have a -40℃ to +105℃ operating temperature range, and are available in a 16-pin QSOP package.

MAX13335E/MAX13336E主要优势和特性:

+3.3V or +5V Operation
+28V to -16V Tolerant Inputs
Wide Common-Mode Input Range (-5V to +11.5V)
Fully Differential Inputs Up to 7VRMS
Quasi-Differential Inputs Up to 3.5VRMS
Audio Presence Detection
Jack Sense Detection
Diagnostic Capability
Programmable Gain with Zero-Crossing Detection
I2C Control Interface
Automotive Grade ESD Protection
• ISO 10605 ±15kV Air Gap
• ±8kV Contact Discharge

MAX13335E/MAX13336E应用:

Radio Head Units
RSA/RSE
Connectivity Modules
Automotive Telematics

图1.MAX13335E/MAX13336E典型应用框图

图2.MAX13335E/MAX13336E
应用电路图(1)

图3.MAX13335E/MAX13336E应用电路图(2)

图4.MAX13335E/MAX13336E应用电路图(3)

评估板MAX13335E EVK

The MAX13335E evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX13335E automotive audio receiver. The IC features a dual automotive differential audio receiver with I2C control and diagnostics. The EV kit features an on-board microcontroller for communicating with the I2C interface of the device. PCB pads are provided for accessing the analog inputs/outputs and the diagnostic I/O ports.

The EV kit operates from a +3.3V or +5V power supply that provides 100mA of current. The EV kit can also operate from the on-board USB +5V supply. The EV kit delivers the audio outputs with programmable gain between -14dB and +16dB. The EV kit can also evaluate the MAX13336E after IC replacement of U1.
Windows XPM-, Windows VistaM-, and WindowsM 7-compatible software is provided to facilitate configuration. The EV kit software controls the on-board microcontroller over the USB, which generates I2C commands.

评估板MAX13335E EVK主要特性:

S +3.3V or +5V Single-Supply Operation
S Proven Audio PCB Layout
S On-Board USB Interface Circuit Generates I2C-Compatible Signals
S PCB Pads for User-Supplied I2C-Compatible Signals
S Surface-Mount Components
S Evaluates the MAX13336E After IC Replacement
S Windows XP-, Windows Vista-, and Windows 7-Compatible Software
S Fully Assembled and Tested

图5.评估板MAX13335E EVK电路图(1)

图6. 评估板MAX13335E EVK电路图(2)
评估板MAX13335E EVK材料清单:



图7.评估板MAX13335E EVK PVB设计图(1):左:元件布局;右:元件面走线

图8.评估板MAX13335E EVK PVB设计图(2):GND层2

图9.评估板MAX13335E EVK PVB设计图(3):左:PWR层3;右:焊接面

 
 
 
    您可能对以下产品感兴趣  
产品型号 功能介绍 兼容型号 封装形式 工作电压 备注
FP8207 FP8207 是一款開關模式的電池充電控制器,輸入電壓應用範圍為4.6V~18V,可對單節或是多節鋰離子電池(最多三節)進行定電流或是恒壓充電,其最大充電電流為3A, TSSOP-14 4.6V-18V 3A开关降压单节/双节/三节锂电充电管理IC
FP6296 工作電壓範圍2.7V~12V;可調輸出電壓最高13V;内置10A的MOS ESOP-8 2.7V-12V 内置MOS的10A大电流DC-DC异步升压IC
HR2125 HR2125是一种双通道、低导通压降的正反向电机驱动芯片,为玩具、打印机和其它电机一体化应用提供一种双通道电机驱动方案。 DFN-10 1.8V-6.8V 低压双通道H桥驱动器
CS5080 CS5080E是一款5V输入,支持双节锂电池串联应用,锂离子电池的升压充电管理IC.CS5080E集成功率MOS,采用异步开关架构,使其在应用时仅需极少的外围器件,可有效减少整体方案尺寸,降低BOM成本。CS5080E的升压开关充电转换器的工作频率为600KHz最大2A输入充电,转换效率为90%。 ESOP-8 3.44V-7.0V 5V USB输入、双节锂电池串联应用、升压充电管理IC
 
 
    相关产品  
 
 
·蓝牙音箱的音频功放/升压/充电管
·单节锂电内置升压音频功放IC选型
·HT7179 12V升24V内置
·5V USB输入、三节锂电升压型
·网络主播声卡专用耳机放大IC-H
 
M12269 HT366 ACM8629 HT338 

业务洽谈:手机:13713728695(微信同号)   QQ:3003207580  EMAIL:panbo@szczkjgs.com   联系人:潘波

地址:深圳市宝安西乡航城大道航城创新创业园A5栋307/309

版权所有:深圳市永阜康科技有限公司  备案号:粤ICP备17113496号