| 当前位置：首页->技术分享 |
|
| TPA3221 100W(立体声)200W(单路)HD音频D类放大器解决方案 |
|
|
| 文章来源：永阜康科技 更新时间：2018/11/23 10:03:00 |
在线咨询： |
| |
TI公司的TPA3221是大功率D类放大器,具有带宽高达100kHz的闭环负反馈,提供音频带的低失真和极好的音频质量,器件工作在AD或低空载电流HEAD(高效AD模式)调制,能对4欧姆负载提供2x105W或对2欧姆负载提供1x208W功率.器件具有单端或差分模拟输入接口,四种可选择增益:18 dB, 24 dB, 30 dB和34 dB,主要用在无线和加电扬声器,条形音箱,超低音音箱,书架立体声系统和专业与公共地址（PA）扬声器.本文介绍了TPA3221主要特性,框图和系统框图,以及TPA3221评估模块主要特性,电路图,材料清单和PCB设计图.
TPA3221 is a high-power Class-D amplifier thatenables efficient operation at full-power, idle andstandby. The device features closed-loop feedbackwith a bandwidth up to 100 kHz, which provides lowdistortion across the audio band and deliversexcellent sound quality. The device operates witheither AD or low idle-current HEAD (High Efficient AD mode) modulation, and can drive up to 2 x 105 W into4-Ω load or 1 x 208 W into 2-Ω load.
The TPA3221 features a single-ended or differentialanalog-input interface that supports up to 2 VRMS withfour selectable gains: 18 dB, 24 dB, 30 dB and 34dB. The TPA3221 also achieves >90% efficiency, lowidle power (<0.25 W) and ultra-low standby power(<0.1 W). This is made possible through the use of70-mΩ MOSFETs, an optimized gate drive schemeand low-power operating modes. TPA3221 includes abuilt-in LDO for easy integration in single-powersupplysystems. To further simplify the design, thedevice integrates essential protection featuresincluding undervoltage, overvoltage, cycle-by-cyclecurrent limit, short circuit, clipping detection,overtemperature warning and shutdown, as well asDC speaker protection.
TPA3221主要特性:
• Wide 7-V to 30-V Supply Voltage Operation
• Stereo (2 x BTL) and Mono (1 x PBTL) Operation
• Output Power at 10% THD+N
– 105-W Stereo into 4 Ω in BTL Configuration
– 112-W Stereo into 3 Ω in BTL Configuration
– 208-W Mono into 2 Ω in PBTL Configuration
• Output Power at 1% THD+N
– 88-W Stereo into 4 Ω in BTL Configuration
– 100-W Stereo into 3 Ω in BTL Configuration
– 170-W Mono into 2 Ω in PBTL Configuration
• 5-V Gate Drive or Built-in LDO for Optional Single-Supply Operation
• Closed-Loop Feedback Design
– Signal Bandwidth up to 100 kHz for High-Frequency Content From HD Sources
– 0.02% THD+N at 1 W into 4 Ω
– 60-dB PSRR (BTL, No Input Signal)
– <75-μV Output Noise (A-Weighted)
– >108-dB SNR (A-Weighted)
– AD or HEAD Modulation Schemes
• Low-Power Operating Modes
– Standby Modes: Mute and < 1 mA Shutdown
– Low Idle-Current HEAD Modulation Scheme
– Single-Channel BTL Operation
• Multiple Input Options to Simplify Pre-Amp Design
– Differential or Single-Ended Analog Inputs
– Selectable Gains: 18 dB, 24 dB, 30 dB, 34 dB
• Integrated Protection: Undervoltage, Overvoltage,Cycle-by-cycle Current Limit, Short Circuit,Clipping Detection, Overtemperature Warning andShutdown, and DC Speaker Protection
• 90% Efficient Class-D Operation (4 Ω)
• Pin-Compatible Family of Devices with Voltageand Power-Level Options
TPA3221应用:
• Wireless and Powered Speakers
• Soundbars
• Subwoofers
• Bookshelf Stereo Systems
• Professional and Public Address (PA) Speakers
图1.TPA3221功能框图
图2.TPA3221简化电路图
图3.TPA3221系统框图
图4.TPA3221差分(2N)AD模式BTL应用电路
图5.TPA3221差分(2N)AD模式PBTL应用电路(1)
图6.TPA3221差分(2N)AD模式PBTL应用电路(2)
TPA3221评估模块
This user ’s guide describes the characteristics, operation, and use of the TPA3221 evaluation module. A complete printed-circuit board (PCB) description, schematic diagram, and bill of materials are also included.
图7.TPA3221评估模块外形图
图8.TPA3221评估模块PCB外形图(顶层)
图9.TPA3221评估模块PCB外形图(底层)
图10.TPA3221评估模块电路图(1)
图11.TPA3221评估模块电路图(2)
图12.TPA3221评估模块电路图(3)
TPA3221评估模块材料清单:
图13.TPA3221评估模块PCB顶层装配图
图14.TPA3221评估模块PCB底层装配图
图15.TPA3221评估模块PCB设计图(1)
图16.TPA3221评估模块PCB设计图(2)
图17.TPA3221评估模块PCB设计图(3)
图18.TPA3221评估模块PCB设计图(4)
图19.TPA3221评估模块PCB设计图(5)
图20.TPA3221评估模块PCB设计图(6)
图21.TPA3221评估模块PCB设计图(7)
图22.TPA3221评估模块PCB设计图(8)
图23.TPA3221评估模块PCB设计图(9)
图24.TPA3221评估模块PCB设计图(10) |
| |
|
|
|
|
|
| |
| |
| |
 |
您可能对以下产品感兴趣 |
 |
|
 |
| 产品型号 |
功能介绍 |
兼容型号 |
封装形式 |
工作电压 |
备注 |
| CS8683 |
130W/30V/4Ω |
|
EQB-32（散热片在顶部，支持外接散热器） |
4.7V-45V |
130W单声道D类功放IC，具有AM干扰抑制功能 |
| CS8673 |
2X42W/24V/8Ω或82W/24V/4Ω |
|
ESOP-16 |
5.0V-26V |
具备扩频功能、低空载电流、免电感、2X40W立体声、80W单声道D类音频功放IC |
| CS8316 |
PO at 10% THD+N, VIN=7.4V
RL=4Ω+22uH 21W(D MODE NCN OFF）
PO at 10% THD+N, VIN =7.4V
RL=3Ω+22uH 25W(D MODE NCN OFF）
|
|
TSSOP-24 |
5V-9V |
针对双节锂电池串联供电应用,固定24倍增益,防破音,AB/D切换,功率限制,内置升压模 块,具备自适应升压功能,恒定25W输出功率R类单声道音频功率放大器 |
| HT560 |
2X40W/18V/4Ω或75W/24V/4Ω |
|
QFN-36 |
4.5V-26V |
30W立体声D类I2S输入音频功放 |
| HT7178 |
输入电压范围：2.7V -14 V;输出电压范围：4.5V-20V
;可编程峰值电流： 14A
|
TPS61088/HT7167 |
DFN-20 |
2.7V-14V |
20V 14A带输出关断的全集成同步升压IC |
| HT317 |
2X42W/18V/4Ω或75W/24V/4Ω |
|
TSSOP-28 |
5V-26V |
42W立体声/75W单声道D类功放IC,，工作电压5-26V，极限耐压32V！ |
|
| |
|
| |
|
|
