| 当前位置：首页->方案设计 |
|
| DRV10987 50W三相无传感器BLDC马达驱动方案 |
|
|
| 文章来源：永阜康科技 更新时间：2018/4/12 13:31:00 |
在线咨询： |
| |
TI公司的DRV10987是50W 12V-24V三相无传感器BLDC马达驱动器,集成了功率MOSFET,提供连续驱动电流高达2A,马达工作电压6.2V-28V,集成了降压转换器5V/100mA,LDO 3.3V/20mA,主要用在空气净化器和加湿器,三向BLDC和PMSM马达,烘干循环风机,排水和水泵,台扇和吊扇.本文介绍了DRV10987主要特性,框图,应用电路图以及评估模块DRV10987 EVM主要特性,电路图,材料清单.
The DRV10987 device is a 3-phase sensorless 180°sinusodial motor driver with integrated powerMOSFETs, which can provide continuous drivecurrent up to 2 A. The device is specifically designedfor cost-sensitive, low-noise, low-external-componentcount fan and pump applications.™
The DRV10987 device delivers current to the motorwith supply voltage as low as 6.2 V. If the powersupply voltage is higher than 28 V, the device stopsdriving the motor and protects the DRV10987circuitry.
The DRV10987 device uses a proprietary sensorless control scheme to provide continuous sinusoidal drive,which significantly reduces the pure tone acoustics that typically occur as a result of commutation. The interfaceto the device is designed to be simple and flexible. The motor can be controlled directly through PWM, analog, orI2C inputs. Motor speed feedback is available through both the FG pin and the I2C interface simultaneously.
The DRV10987 device features an integrated buck regulator to step down the supply voltage efficiently to 5 V forpowering both internal and external circuits. The 3.3-V LDO also may be used to provide power for externalcircuits. The standby-mode (8.5 mA) version (DRV10987S) leaves the regulator running, and the sleep-mode (48μA) version (DRV10987D) shuts the regulator off. Throughout this data sheet, the DRV10987 part number isused for both devices, that is, DRV10987D (sleep version) and DRV10987S (standby version), except for specificdiscussions of sleep vs standby functionality.
An I2C interface allows the user to rEPROgram specific motor parameters in registers and to program theEEPROM to help optimize the performance for a given application. The DRV10987 device is available in athermally-efficient HTSSOP, 24-pin package with an exposed thermal pad. The operating ambient temperature isspecified from –40℃ to 125℃.
DRV10987主要特性:
1• Operation Voltage Range:
– Motor Operation, 6.2 V to 28 V
• Total Driver H + L rDS(on)
– 250 mΩ at TA = 25℃
• Drive Current: 2-A Continuous Winding Current(3-A Peak)
• Sensorless Sinusoidal 180° Commutation Scheme
• Configurable Output PWM Slew Rate andFrequency for EMI Management
• Initial Position-Detect Algorithm to Avoid Back-Spin During Start-Up
• No External Sense Resistor Required
• Flexible User Interface Options:
– I2C Interface: Access Registers for Commandand Feedback
– Dedicated SPEED Pin: Accepts Either Analogor PWM Input
– Dedicated FG Pin: Provides TACH Feedback
– Spin-Up Profile Can Be Customized WithEEPROM
– Forward-Reverse Control With DIR Pin
• Integrated Buck Converter, 5‑V, 100-mA
• Integrated LDO, 3.3‑V, 20-mA
• Standby Current, 8.5-mA
• Supply Current of 8.5 mA With Standby Version(DRV10987S)
• Supply Current of 48 μA With Sleep Version(DRV10987D)
• Protection Features
– Overcurrent Protection (Phase-to-Phase,Phase-to-GND and Phase-to-VCC Short
Circuits)
– Lock Detection to Detect Rotor Lock Condition
– Anti-Voltage Surge (AVS) Protection
– Undervoltae Lockout (UVLO)
– Overvoltage Protection
– Thermal Warning and Shutdown
• Thermally Enhanced Package
DRV10987应用:
• Pedestal and Ceiling Fans
• Air Purifiers and Humidifiers
• Dryer Circulation Fans
• Drain and Water Pumps
• Three-Phase BLDC and PMSM Motors
图1.DRV10987功能框图
图2.DRV10987典型应用电路图
评估模块DRV10987 EVM
This user ’s guide provides complete details of the customer evaluation module (EVM) for the DRV10987device including hardware implementation, jumper configuration, and operating procedure to run 3-phaseBLDC motors. This EVM user’s guide is intended to be used with the DRV10987 Tuning Guide tooptimally tune a user motor.
The DRV10987 EVM is a complete solution for evaluating the DRV10987 12-V or 24-V, three-phasesensorless BLDC motor drivers. Device evaluation and configuration for specific applications is possiblewith the provided DRV10987 EVM GUI. This document describes the kit details and explains the functionsand locations of test points, jumpers, and connectors present on the kit. This document is also a quickstartguide for using the GUI to tune a motor for application. For detailed information about the operatingmodes of the DRV10987 device
图3.评估模块DRV10987 EVM外形图
评估模块DRV10987 EVM主要特性:
• DRV10987 EVM board
• USB2ANY communication board for I2C GUI interaction
• USB cable
• 10-pin ribbon cable to connect the USB2ANY and DRV10987 EVM
• DRV10987 EVM GUI
The DRV10987 EVM boards and GUI are designed to work together to evaluate the device features.
图4.评估模块DRV10987 EVM PCB打印图
图5.评估模块DRV10987 EVM电路图
评估模块DRV10987 EVM材料清单:
 |
| |
|
|
|
|
|
| |
| |
| |
 |
您可能对以下产品感兴趣 |
 |
|
 |
| 产品型号 |
功能介绍 |
兼容型号 |
封装形式 |
工作电压 |
备注 |
| AT8812C |
AT8812C为打印机和其它电机一体化应用提供一种双通道集成电机驱动方案。 |
DRV8812/DRV8813 |
HTSSOP-28 |
8～38V |
具有4级电流调节的1A双极步进电机驱动IC |
| AT8810 |
AT8810为打印机和其它电机一体化应用提供一种双通道集
成电机驱动方案。 |
BD68610 |
HTSSOP-16 |
8～38V |
舞台灯光专用步进电机驱动IC |
| HR4995 |
HR4995是一种便于使用的内部集成了译码器的微特步进电机驱动器。 |
A4985 |
QFN-24 |
8V-38V |
内置转换器和过流保护的微特步进电机驱动芯片 |
| HR9110 |
HR9110是应用于直流电机方案的单通道H桥驱动器芯片。 |
L9110 |
SOP-8 |
1.8V-6.8V |
1.2A玩具单通道直流电机驱动IC |
| HR2125 |
HR2125是一种双通道、低导通压降的正反向电机驱动芯片，为玩具、打印机和其它电机一体化应用提供一种双通道电机驱动方案。 |
|
DFN-10 |
1.8V-6.8V |
低压双通道H桥驱动器 |
| AT8870 |
AT8870是一款刷式直流电机驱动器，适用于打印机、电器、
工业设备以及其他小型机器 |
DRV8870/A4950 |
SOP-8 |
6.5V-38V |
3.6A单通道刷式直流电机驱动IC |
| AT8812 |
AT8812为打印机和其它电机一体化应用提供一种双通道集成电机驱动方案。AT8812有两路H桥驱动，最大输出38V 2A，可驱动两路刷式直流电机，或者一路双极步进电机，或者螺线管或者其它感性负载。 |
DRV8812 |
HSSOP-28 |
8V-38V |
|
| AT8313 |
AT8313提供三路可独立控制的半H桥驱动，每个半H桥可输出2.5A峰值电流或1.75A均方根（RMS）电流输出，可驱动一个三相直流无刷电机，也可被用于驱动螺线管或者其它负载。 |
DRV8313 |
QFN-36 |
8-38V |
|
| HR8826 |
HR8826是一种内置步进表的集成微步进电机驱动器，为打印机、扫描仪和其它自动化设备提供解决方案。其设计为能使双极步进电机以全、半、1/4、1/8、1/16、1/32步进模式工作。步进模式由逻辑输入MODEx选择。输出驱动能力达到38V和±3A。HR8826的衰减模式可编程。 |
DRV8825 |
TSSOP-28 |
8V-38V/3A |
具有片上1/32微步进分度器的3A双极步进电机驱动IC |
| HR8828 |
HR8828是一种内置步进表的集成微步进电机驱动器，为打印机、扫描仪和其它自动化设备提供解决方案。其设计为能使双极步进电机以全、半、1/4、1/8、1/16、1/32步进模式工作。步进模式由逻辑输入MODEx选择。输出驱动能力达到38V和±3.5A。HR8828的衰减模式可编程。 |
TB6560 |
QFN-48/LQFP-48 |
8V-38V/3.5A |
内置步进表的3.5A集成微步进电机驱动器 |
| HR3992 |
HR3992是一种便于使用PWM来控制电流的双极微特步进电机驱动器, 输出驱动能力达到35V和±1.5A。内部固定关闭时间的PWM电流控制时序电路可以通过串行接口进行编程，使其工作在慢衰、快衰或混合衰减模式。 |
A3992 |
TSSOP-24 |
8V-35V/1.6A |
DMOS 全桥 PWM 微步进电机驱动芯片 |
| HR4982 |
HR4982是一种便于使用的内部集成了译码器的微特步进电机驱动器。其设计为能使双极步进电机以全、半、1/32和1/128步进模式工作。步进模式由逻辑输入MSx选择。输出驱动能力达到35V和±2A。HR4982包含一个工作在慢衰或混合衰减模式的固定关闭时间的电流调节器。 |
A4982 |
TSSOP-28 |
8V-35V/2A |
内置转换器和过流保护的微特步进电机驱动芯片 |
| HR4988 |
HR4988是一种便于使用的内部集成了译码器的微特步进电机驱动器。其设计为能使双极步进电机以全、半、1/4、1/8、1/16、1/32、1/64和1/128步进模式工作。步进模式由逻辑输入MSx选择。输出驱动能力达到35V和±2A。HR4988包含一个工作在慢衰或混合衰减模式的固
定关闭时间的电流调节器。 |
A4988 |
TSSOP-28/QFN-28 |
8V-35V/2A |
内置转换器和过流保护的微特步进电机驱动芯片 |
| HR8833 |
HR8833为玩具、打印机和其它电机一体化应用提供一种双通道电机驱动方案。HR8833有两路H桥驱动，可以驱动两路刷式直流电机，或者一个双极步进电机，或者螺线管或者其它感性负载。 |
DRV8833 |
TSSOP-16 |
2.70V-12.8V |
2A低电压双路刷式直流或单路双极步进PWM绕组电流调节/限制电机驱动器IC |
| HR5561 |
HR5561是应用于直流电机方案的单通道H桥驱动器芯片。
HR5561的H桥驱动部分采用低导通电阻的PMOS和NMOS功率管。低导
通电阻保证芯片低的功率损耗，使得芯片安全工作更长时间。此
外HR5561拥有低待机电流、低静态工作电流。这些性能使能HR5561
易用于玩具方案。 |
AT5561 |
SOP-8/DIP-8 |
1.8V-6.0V |
玩具单通道直流电机驱动器 |
| HR1084 |
HR1084是应用于直流电机方案的单通道H桥驱动器芯片。
HR1084的H桥驱动部分采用低导通电阻的PMOS和NMOS功率管。低导
通电阻保证芯片低的功率损耗，使得芯片安全工作更长时间。此
外HR1084拥有低待机电流、低静态工作电流。这些性能使能HR1084
易用于玩具方案。 |
DW1084 |
SOP-8/DIP-8 |
1.8V-6.0V/1A |
玩具单通道低电压1A直流电机驱动IC |
| HR4985 |
HR4985是一种便于使用的内部集成了译码器的微步进电机驱动器。其设计为使双极步进电机能够以全、半、1/4和1/8步进操作。步进模式由逻辑输入MSx选择。输出驱动能力达到35V和±1A。HR4985包括一个能够控制慢或混合衰减模式的电流调节器，其截止时间固定。 |
A4985 |
QFN-24 |
8V-35V/1.0A |
带转换器和过流保护的 DMOS 微步驱动器 |
| HR3988 |
HR3988是一款四路DMOS全桥驱动芯片，能够驱动多达2个步进电机或4个直流电机。每个全桥输出额定值高达36V, 1.2 A。 |
A3988 |
TQFP-48 |
8V-35V/1.2A |
四路DMOS全桥电机驱动芯片 |
| HR3979 |
HR3979是一种新近开发出来、专门用于双极步进电机的微步进电机驱动集成电路，能驱动马达以全、1/2、1/4及1/16步进操作，其内部集成了步进和直接译码接口、正反转控制电路、双H桥驱动，单路输出额定值达到35V、±2.5A。 |
A3979 |
TSSOP-28 |
8V-35V/2.5A |
带转换器的微步 DMOS 驱动器 |
| HR3967 |
HR3967是一种新近开发出来、专门用于双极步进电机的微步进电机驱动集成电路，能以全、1/2、1/4及1/8微步细分驱动马达，输出额定值能达到30V、±750mA 。 |
A3967 |
SOP-24 |
8V-35V/750mA |
内置转换器的微步进电机驱动芯片 |
|
| |
|
| |
|
|
