| 当前位置：首页->行业资讯 |
|
| TPA3138D2 10W 超低 EMI、无电感器、立体声 D 类音频放大器 |
|
|
| 文章来源：永阜康科技 更新时间：2018/5/31 12:39:00 |
在线咨询： |
| |
描述
The TPA3138D2 is 10-W, up-to-90% efficient, stereo Class-D audio amplifier. It can drive stereo speaker with as low as 4-Ω.
Advanced EMI Suppression with Spread Spectrum Control enables the use of inexpensive ferrite bead filters while meeting EMC requirements for system cost reduction.
The TPA3138D2 is fully protected against shorts and overload; It also includes a power limiter and DC detection circuit for speaker protection. The short-circuit and thermal protections include an auto-recovery feature.
Customers can leverage every TPA3138D2 feature in existing designs as it is fully pin-to-pin compatible to TI’s TPA3110D2, TPA3110LD2,TPA3136D2 and TPA3136AD2.
特性
- Reduced Solution Size and Cost:
- Inductor-Less operation: Low-cost ferrite beads substitute inductors
- EN55013 and EN55022 EMC compliant when no inductors are used
- No external heatsink required: PCB plane can be used as heatsink
- Longer Battery Life for Portable Systems:
- Low idle-current mode
- >90% Class-D Efficiency
- Audio Performance:
- 2 × 10 W/ch into 6-Ω,1% THD+N, 12-V supply
- THD+N : 0.07% @ 1W, 1kHz input, 6-Ω
- Voltage Range: 3.5-V to 14.4-V in Low idle current mode
- Flexible Audio Solution:
- Single-Ended or Differential Analog Inputs
- Selectable Gain: 20dB and 26dB
- Pop and Click-Free Startup
- Integrated self-protection:
- Pin-to-pin, Pin-to-Ground, and Pin-to-Power short circuit protection
- Power short circuit protection
- Power Limiter and DC Speaker Protection
- Pin-to-Pin compatible with TPA3110D2, TPA3110LD2, TPA3136D2 and TPA3136AD2
All trademarks are the property of their respective owners.
简化应用原理图
|
| |
|
|
|
|
|
| |
| |
| |
 |
您可能对以下产品感兴趣 |
 |
|
 |
| 产品型号 |
功能介绍 |
兼容型号 |
封装形式 |
工作电压 |
备注 |
| CS86189 |
2X25.5W/14V/4Ω或47W/18V/4Ω |
TPA3110/CS8618/CS3815 |
TSSOP-28 |
6V-18.5V |
无滤波2X25W立体声D类功放IC,管脚兼容TPA3110 |
| CS5082 |
CS5082E是一款5V输入,支持双节锂电池串联应用,锂离 子电池的升压充电管理IC.CS5082E集成功率MOS，采用异步开关架构，使其在应用 时仅需极少的外围器件，可有效减少整体方案尺寸，降低BOM成本。 CS5082E的升压开关充电转换器的工作频率为600KHz最大2A输入充 电，转换效率为90%。
|
CS5080 |
ESOP-8 |
3.44V-7.0V |
带NTC功能、5V USB输入、双节锂电池串联应用、升压充电管理IC，管脚兼容CS5080 |
| HT317 |
2X42W/18V/4Ω或75W/24V/4Ω |
|
TSSOP-28 |
5V-26V |
42W立体声/75W单声道D类功放IC,，工作电压5-26V，极限耐压32V！ |
| CS5080 |
CS5080E是一款5V输入,支持双节锂电池串联应用,锂离子电池的升压充电管理IC.CS5080E集成功率MOS，采用异步开关架构，使其在应用时仅需极少的外围器件，可有效减少整体方案尺寸，降低BOM成本。CS5080E的升压开关充电转换器的工作频率为600KHz最大2A输入充电，转换效率为90%。 |
|
ESOP-8 |
3.44V-7.0V |
5V USB输入、双节锂电池串联应用、升压充电管理IC |
| CS3816 |
2X15W/16V/8Ω |
|
ESOP-16 |
6V-20V |
2×15W 免电感低EMI立体声D类音频功率放大电路,支持免电感和耳机输出应用 |
|
| |
|
| |
|
|
